Methyl Ethyl Ketone Vapor Detector Tube
Tube No. 152L has a detection range of 3 - 384 ppm for Methyl
Ethyl Ketone. With the ACGIH TLV-TWA set at 200 ppm and the
TLV-STEL set at 300 ppm this tube gives a clear indication of
worker exposure concentrations relative to the TLVs in approximately 1 minute using only 1/2 pump stroke with the Gastec
pump (range 120-384 ppm) For a lower detection range use full
pump stroke to measure 3 - 120 ppm. — Nextteq LLC., 877/312-
2333, www.nextteq.com
Circle1onCard Enhanced CO & H2S Sensors
The new generation of the 4CF+ carbon monoxide and 4HS+ hydrogen sulfide sensors
are now available. A number of design improvements and
highly automated volume manufacturing and test techniques
have contributed to the new sensors’ enhanced performance.
All pins are gold plated, lowering contact resistance with the
socket. Internal current collector wires are ultrasonic welded. A
100% leak test on the electrode sealing along with 24 different
parameters tested are an integral part of the manufacturing process.
— City Technology, 866/414-2489, www.citytech.com Circle 2 on Card
Advanced Absorption Technology
PetroGuard is a dry, white granular high capacity instantly solidifying
polymeric absorbent for hazardous chemical spills. Once applied,
PetroGuard will form an interlocking network matrix with rubber-like
consistency. After treatment with PetroGuard, the solidified matrix
becomes impervious to air or water, thereby eliminating vapor production. Deactivation process is mechanical not chemical and is
non-exothermic. — Guardian Environmental Technologies,
860/350-2200, www.guardianenvironmental.com
Circle 5 on Card
Portable Gas Monitor
The OBSERVER® portable gas monitor - has the ability to indicate hazardous conditions in two places at the same time. The
OBSERVER® separates the sensors from the display unit and has
alarm annunciation on both halves. The instrument monitors up
to 5 different gases, has auto self-diagnostics of batteries, sensors, and electronics. This separate transmitting and receiving
unit enables lowering of the sensing unit into a confined space to check for the presence
of gases and safe oxygen levels before entering the area of concern. — Sensidyne LP,
800/451-9444, www.sensidyne.com Circle 6 on Card
Disk Filter Respirator for Tough Work Environments
The 2200 series particulate filter technology captures particles in a
three layer filtration design versus the traditional five layers. The
reduced number of layers enables easier breathing while offering
the same level of filtration performance. It also incorporates a new
netting construction technology, enhancing durability that can
mean a longer-lasting filter. — 3M, 800/243-4630,
www.3M.com/OccSafety Circle 4 on Card
Programmable, Data Logging Air Sampler
The Buck Elite™ is the company’s newest “Tradition of Innovation”
Sampling Pump. This next generation sampler is specifically intended for IH, Personal Sampling, Area Environmental Sampling and
Occupational Health Studies. Its new advanced design, easy programmability, improved software, and powerful sampling performance provide everything IH professionals need - in a single pump.
— AP Buck Inc. 800/330-2825, www.apbuck.com
Circle 3 on Card
ISSUE FEATURES Air Samplers Construction Safety Emergency Responders Eye/Face & Head Protection
WWW.INDUSTRIALHYGIENENEWS.COM • 800/245-3182